Touch control register
TOUCH_DRANGE | TOUCH attenuation. |
TOUCH_DREFL | TOUCH reference voltage low. 0: 0.5 V 1: 0.6 V 2: 0.7 V 3: 0.8 V. |
TOUCH_DREFH | TOUCH reference voltage high. 0: 2.4 V 1: 2.5 V 2: 2.6 V 3: 2.7 V. |
TOUCH_XPD_BIAS | TOUCH BIAS power switch. |
TOUCH_REFC | Touch pad 0 reference capacitance. |
TOUCH_DBIAS | 0: Use bandgap bias. 1: Use self bias. |
TOUCH_SLP_TIMER_EN | Touch timer enable bit. |
TOUCH_START_FSM_EN | 0: TOUCH_START and TOUCH_XPD are controlled by soft- ware. 1: TOUCH_START and TOUCH_XPD are controlled by the Touch FSM. |
TOUCH_START_EN | 1: Start the Touch FSM, only valid when RTC_CNTL_TOUCH_START_FORCE = 1. |
TOUCH_START_FORCE | 0: Start the Touch FSM by timer. 1: Start Touch FSM by software. |
TOUCH_XPD_WAIT | The waiting cycles (in 8MHz) between TOUCH_START and TOUCH_XPD. |
TOUCH_SLP_CYC_DIV | When a touch pad is active, sleep cycle could be divided by this number. |
TOUCH_TIMER_FORCE_DONE | Force touch timer done. |
TOUCH_RESET | Reset TOUCH FSM via software. |
TOUCH_CLK_FO | Touch clock force on. |
TOUCH_CLKGATE_EN | Touch clock enable bit. |